Published in Garden Design by admin at Wednesday, August 08th 2018 23:06:19 PM.
Before you apply the garden fence paint to the fence, you need to ensure that the fence is cleaned completely before and that there is no weed, grass or leaves on it or near it. You need to clean the loose paint using a hose or a power washer and to scrub it with a brush and water and detergent. You can use the paint scrapers to remove the paint that may be on the fence again. If you want to paint the chain-link fence, you have to remove the debris, spider webs and the dirt. You may use the wire brush to scrap the loose rust off and to use the nap roller to apply a rusty metal primer at the fence. You should not paint the chain like fence that has been vinyl coated. This is because a professional has to paint such fence.
You may use a sprayer, pad and a roller for the stain or to paint large and flat wooden fence. You may apply the garden fence paint using a high volume with a low pressure sprayer or airless model. You may catch the work paint or the drips in difficult places using the brush. The stain brush can hold even more finish with less dripping compared to regular paint brush.
Thin paint offers better coverage for the wire fencing. You have to mix the paint and the solvent for each gallon of the paint so that you may thin out the paint. After the staining and painting, you may wash out the roller frame and you may pan it with water or paint thinner. However, this will depend on which type of the paint that you use. When painting the new wood fence, you may consider garden fence paint according to the garden paving ideas that are already in place. You should also apply oil based semi transparent stain or exterior primer on new materials.